About electroforming signs

Writer：admin Time：2023-07-03 13:40 Browse：℃

　　When it comes to electroformed signs, professional signs, engineering, business, and technical personnel in the hardware industry are already familiar with them, but they may be unfamiliar to non industry personnel. Below, Da Dong Electronics will popularize some content of electroformed signs for everyone.

　　1、 Classification of electroformed signs

　　Electroformed labels are mainly divided into two types: electroformed thick labels and electroformed thin labels (also known as nickel plate labels). In daily life, the application of electroformed nickel signs is very common. The electroformed nickel label is made by casting and plating nickel sheets, with a thickness between 0.03mm and 0.1mm (depending on the customer's requirements). The surface is smooth, flawless, and the accuracy is accurate. It is firmly adhered with strong 3M adhesive, making it very convenient to use.

　　2、 Material, adhesive and surface effect of electroformed signs

　　The main materials include nickel, copper, gold, and chromium; Common backing adhesive includes 3M 7533/3M 9448/3M 467/3M468/Hot-melt adhesive, etc; There are many colors available, mainly based on customer needs, usually made in silver/black/gold/rose gold/champagne gold; The commonly used surface effects include bright surface effect, wire drawing effect, sandblasting effect, mesh effect, and CD pattern effect.

　　3、 Characteristics of electroformed signs:

　　The electroformed sign is divided into four layers, with the bottom layer being the adhesive layer, the second layer being adhesive, the third layer being the electroformed sign we use, and the fourth layer being the surface of the electroformed sign, which is also composed of a transparent protective film. The surface can be made matte or bright, and the surface can be treated with wire drawing.

　　4、 Production process of electroformed signs:

　　The process of electroforming signs is relatively simple, mainly produced by electroforming without the use of any molds, and the entire production process only requires one film. Save money and time. After the production unit receives the order, the sample can usually be produced on the same day, and the product can be produced in a few days. General process: Drawing - Film production - Electroforming - Plating - Film application - Gluing - Cutting - Packaging - Shipping.