Requirements and precautions for label production process

Writer：admin Time：2023-07-26 11:29 Browse：℃

　　In practical applications, our mechanical products, furniture products, household appliances, etc. are all equipped with signs. A high-quality product equipped with a good label can not only enhance the brand awareness of the company's products, but also elevate the product to a higher level. So, when we understand the label manufacturer, we need to understand some label production process requirements and precautions in order to better choose.

　　So, what are the requirements and precautions for the production process of signage? Da Dong Electronics will explain in detail here:

　　1、 Process requirements for stainless steel signage:

　　1. Stainless steel plates must be gouged, bent, and welded (stainless steel plates must be gouged first and then bent to ensure edge straightness); Ensure that the arc angle R at the bending point is<1MM.

　　2. Before welding, remove surface oil stains to reduce defects such as solder joints, air holes, and cracks.

　　3. After welding, polish all visible welds smooth, as smooth as the surrounding surface, without obvious scratches.

　　2、 Requirements for profiles of aluminum alloy signs:

　　1. Aluminum alloy profiles and commonly used plastic material accessories should meet the quality requirements of aluminum alloy label profiles.

　　2. The angular deviation of aluminum alloy profiles is less than 1 degree of positive and negative deviation.

　　3. Plane clearance<=0.4% * B (B is the width of the profile).

　　3、 Notes on appearance requirements for completed signage:

　　1. After installation, the appearance of the sign is exquisite, with no screws, scratches, bubbles, or obvious uneven colors on the surface. The paint must have no obvious color difference, and the materials used comply with the design requirements.

　　2. The installation method of the sign is convenient for panel replacement and maintenance.