Cleaning method for nickel electroplating signs

Writer：admin Time：2024-12-16 18:17 Browse：℃

There are five points to note when cleaning nickel electroplating signs correctly. Qingdao Dadong Electronics will explain them to you below:

Basic cleaning:

Gently wipe the surface of the label with warm water and a soft cloth or sponge to remove dust and impurities.

Avoid using hard or sharp objects to scratch the surface.

Use cleaning agents:

For stubborn stains, a neutral cleaner can be chosen, diluted first and then gently brushed with a fine bristled brush.

After cleaning, be sure to rinse thoroughly with clean water and wipe dry with a clean cloth.

Avoid chemical corrosion:

Do not use corrosive cleaning agents such as acid, alkali, ammonia, etc. to avoid damaging the metal surface.

For difficult to remove stains, try wiping with a small amount of alcohol or vinegar, but test in an inconspicuous place first.

Dry storage:

The cleaned nickel electroplated signs should be dried before storage to avoid corrosion and rust caused by moisture.

Regular maintenance:

Regularly inspect and clean the signs to maintain their brightness and aesthetics.

If scratches or peeling of the coating are found, they should be dealt with promptly to prevent corrosion from spreading.