Warning sign printing process

Writer：admin Time：2023-07-11 14:08 Browse：℃

　　Warning signs should be printed in light color first, with silk plates and positioning: aluminum plate materials should be positioned with three point edges. During color printing. Reprint in dark color. The spacing between the printing plate and the substrate is 12mm, which is related to the selection of the silk screen. Nylon silk screen has good elasticity and great elasticity, usually 23mm. The scraper is made of polyurethane rubber, with a hardness of 7075 degrees and a thickness of 89 millimeters. When printing, the viewing point of the scraper should be 70 degrees, and the scraper speed should move in a uniform straight line. Proper protective film: for the printed label, in order to avoid the formation of wounds during cutting and transportation, the surface should be pasted with a protective film of Tongming pressure-sensitive adhesive and double-sided adhesive tape instead. Cutting: Using a small cutting machine, forming can be achieved through hole positioning or edge positioning stamping.

　　The reflective road pole anti-collision and reflective warning label is made using the principle of high refractive index glass bead regression reflection and advanced technology of focusing and post-processing. It can reflect the distant direct light back to the light emitting place, and has good anti Catoptrics performance no matter in the day or night. Especially at night, it can achieve high visibility just like during the day. The reflective road pole anti-collision warning sticker made of this high visibility reflective material can be easily detected by nighttime drivers whether the user is in a distant location or in the presence of interference from light or scattered light.