About Electroformed Signage Spray Painting

Writer：admin Time：2025-01-02 18:19 Browse：℃

　　The painting process of electroplated signs mainly includes the following steps:

　　1、 Preparation and handling in advance

　　Oil removal: Firstly, the label needs to be degreased to remove surface oil stains and impurities.

　　Cleaning: After removing oil, clean the label with water to ensure a clean surface.

　　Rust removal: For metal signs, rust removal treatment is also required to ensure the painting effect.

　　Re cleaning: After rust removal, rinse with water again to ensure no residue.

　　2、 Surface treatment and phosphating

　　Surface adjustment: Make surface adjustments for subsequent processing.

　　Phosphating: Phosphating treatment is applied to the label to enhance the adhesion and corrosion resistance of the paint film.

　　Cleaning and drying after phosphating: After phosphating, clean and dry the label again to ensure that the surface is free of moisture.

　　3、 Spray painting and drying

　　Spray primer: Spray primer evenly on the dried signs.

　　Primer drying: Let the primer dry naturally, avoid exposure to sunlight, and ensure that it is carried out in a constant temperature environment.

　　Spray topcoat: After the primer is dry, spray the topcoat evenly.

　　Drying of topcoat: Allow the topcoat to dry naturally to complete the painting process.

　　4、 Quality inspection